CentOS7修改网卡DHCP获取IP为静态IP

1.修改网卡配置

[root@centos7 ~]#cd /etc/sysconfig/network-scripts/

[root@centos7 network-scripts]# vi ifcfg-eth0

TYPE=Ethernet

PROXY_METHOD=none

BROWSER_ONLY=no

BOOTPROTO=static       #修改为static

DEFROUTE=yes

IPV4_FAILURE_FATAL=no

IPV6INIT=yes

IPV6_AUTOCONF=yes

IPV6_DEFROUTE=yes

IPV6_FAILURE_FATAL=no

IPV6_ADDR_GEN_MODE=stable-privacy

NAME=eth0

UUID=048802a8-f20c-4c19-902a-e326b3a69686

DEVICE=eth0

ONBOOT=yes                      #修改网卡随系统自启动

IPADDR=192.168.155.10      #修改为指定IP

NETMASK=255.255.255.0    #掩码

GATEWAY=192.168.155.1    #网关

2.重启网卡服务

[root@centos7 network-scripts]# systemctl restart network

3.验证网卡IP

重启后，重新连接查看网卡信息

[root@centos7 ~]# ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 192.168.155.10  netmask 255.255.255.0  broadcast 192.168.155.255

        inet6 fe80::8453:5a1:debb:b9d5  prefixlen 64  scopeid 0x20<link>

        ether 00:0c:29:c4:34:bd  txqueuelen 1000  (Ethernet)

        RX packets 1093  bytes 96517 (94.2 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 706  bytes 100054 (97.7 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 1  (Local Loopback)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 0  bytes 0 (0.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500

        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255

        ether 52:54:00:1a:02:e7  txqueuelen 1000  (Ethernet)

        RX packets 0  bytes 0 (0.0 B)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 0  bytes 0 (0.0 B)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@centos7 ~]#